CCD: Avalanche Photodiodes
An avalanche photodiode is a silicon-based semiconductor containing a pn junction consisting of a positively doped p region and a negatively doped n region sandwiching an area of neutral charge termed the depletion region.
These diodes provide gain by the generation of electron-hole pairs
from an energetic electron that creates an "avalanche" of electrons in
the substrate.
Presented in Figure 1 is an illustration of a typical avalanche
photodiode. Photons entering the diode first pass through the silicon
dioxide layer and then through the n and p layers before
entering the depletion region where they excite free electrons and
holes, which then migrate to the cathode and anode, respectively. When a
semiconductor diode has a reverse bias (voltage) applied and the
crystal junction between the p and n layers is illuminated, then a current will flow in proportion to the number of photons incident upon the junction.
Avalanche diodes are very similar in design to the silicon p-i-n
diode, however the depletion layer in an avalanche photodiode is
relatively thin, resulting in a very steep localized electrical field
across the narrow junction. In operation, very high reverse-bias
voltages (up to 2500 volts) are applied across the device. As the bias
voltage is increased, electrons generated in the p layer continue
to increase in energy as they undergo multiple collisions with the
crystalline silicon lattice. This "avalanche" of electrons eventually
results in electron multiplication that is analogous to the process
occurring in one of the dynodes of a photomultiplier tube.
Avalanche photodiodes are capable of modest gain (500-1000), but
exhibit substantial dark current, which increases markedly as the bias
voltage is increased (see Figure 2). They are compact and immune to
magnetic fields, require low currents, are difficult to overload, and
have a high quantum efficiency that can reach 90 percent. Avalanche
photodiodes are now being used in place of photomultiplier tubes for
many low-light-level applications.
Contributing Authors
Kenneth R. Spring - Scientific Consultant, Lusby, Maryland, 20657.
Michael W. Davidson - National High Magnetic Field Laboratory, 1800 East Paul Dirac Dr., The Florida State University, Tallahassee, Florida, 32310.
http://micro.magnet.fsu.edu/primer/digitalimaging/concepts/avalanche.html